Highlight-color: rgba(255, 255, 255, 0); margin: 0px; color: rgb(102, 102, 102); font-family: "microsoft yahei", 宋体, Arial; font-size: 14px;">

1、 Product Introduction:

The temperature/humidity/salt spray composite test chamber is designed to simulate the most realistic natural conditions in accelerated corrosion testing. It simulates the conditions commonly encountered in natural environments and combines them with several times the harsh conditions of the natural environment, such as salt spray, dry, humid, room temperature, low temperature, etc. It can be tested in any order or separately.

The main test products are aimed at products used under intense environmental changes, such as automotive parts, aviation equipment, photography equipment, building materials, electroplating coatings, and electronic motor systems, which are suitable for metal electrochemical corrosion resistance.

2、 Product features:

Using an LCD digital display color touch screen temperature and humidity controller (OYO U-8256P from Japan), the temperature and humidity test curves can be fully recorded.

Control method: Temperature, humidity, and temperature and humidity can be controlled by program alternating control.

Program group capacity: 140Pattern (group) 1400Step (segment) Each program group can have up to 99 Repest segments.

Each execution mode time can be set arbitrarily from 0-999 hours and 59 minutes.

Each group can freely set a partial loop of 1-999 or a complete loop of 1-999.

Equipped with power-off memory function, it can continue to perform unfinished tests after power restoration.

Can be connected to a computer via RS232 interface.

Execution standards and testing methods

GB/T 20854-2007 Dry and Wet Salt Spray Test

ISO 14993-2001 Dry and Wet Salt Spray Test

3、 Specification and model:

Model GC-FH-90D GC-FH-120D GC-FH-160D GC-FH-200D

Indoor box size (cm) 90x60x50 120x80x50 160x100x50 200x120x60

Outdoor box size (cm) 141x88x128 190x110x140 230x130x140 270x150x150

Temperature range -20 ℃- 10 ℃, RT~80 ℃

Humidity range 20%~98%

Temperature and humidity analysis accuracy/uniformity ± 0.1 ℃; ±0.1%R.H./±1.0℃； ±3.0%R.H.

Temperature and humidity control accuracy/fluctuation ± 1.0 ℃; ±2.0%R.H./±0.5℃； ±2.0%R.H.

Laboratory Temperature Saltwater Test Method (NSS ACSS) 35 ℃± 1 ℃/Corrosion Resistance Test Method (CASS) 50 ℃± 1 ℃

Pressure Bucket Temperature Saltwater Test Method (NSS ACSS) 47 ℃± 1 ℃/Corrosion Resistance Test Method (CASS) 63 ℃± 1 ℃

Salt water temperature 35 ℃± 1 ℃ 50 ℃± 1 ℃

Add 0.26 grams of copper chloride (CuCl2 2H2O) per liter to a saline solution concentration of 5% or a sodium chloride solution concentration of 5%

Compressed air pressure 1.00 ± 0.01kgf/cm2

Spray volume 1.0~2.0ml/80cm2/h (collect at least 16 hours and take the average value)

PH 6.5~7.2 3.0~3.2

Spray mode Continuous spray

Power supply AC220V 1&Phe; 1* AC220V1Φ 20A AC220V1Φ 20A AC220V1Φ 30A